View MKP3361X1_4524910.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MKP 336 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type
168x12(halfpage)
l
w
FEATURES
15 to 27.5 mm lead pitch. Supplied loose in box, taped on reel Lead (Pb)-free product RoHS-compliant product
e3
RoHS
COMPLIANT
h
RATED VOLTAGE
AC 275 V; 50 to 60 Hz
lt
PERMISSIBLE DC VOLTAGE
DC 630 V
O dt
P 0.4
Dimensions in mm
ENCAPSULATION
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
NO FOCUS PRODUCT: USE MKP 3381 X1 APPLICATIONS
X1 class For X1 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V(AC) For application limitations please refer to section "Application notes"
CLIMATIC TESTING CLASS ACC. TO EN 60068-1
55/105/56/B
CAPACITANCE RANGE (E12 SERIES)
E12 series 0.01 to 1 F Preferred values acc. to E6
REFERENCE STANDARDS
"IEC 60384-14 2nd edition and EN 132400" "IEC 60065, pass. flamm. class B" 250 V: CSA-C22.2 No 1; UL1414 275 V: UL1283; ENEC
CAPACITANCE TOLERANCE
20 %; 10 %; 5 %
LEADS
Tinned wire
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer's type designation; code for dielectric material, only for pitch 15 mm; manufacturer location; year and week
RATED TEMPERATURE
105 C
DIELECTRIC
Polypropylene film
MAXIMUM APPLICATION TEMPERATURE
105 C
ELECTRODES
Metallized film
DETAIL SPECIFICATION
For more detailed data and test requirements contact: rfi@vishay.com
CONSTRUCTION
Mono construction
www.vishay.com 170 For technical questions contact: rfi@vishay.com Document Number: 28117 Revision: 15-Feb-08
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
Vishay BCcomponents
TYPE AND PITCHES 15.0 mm 336 1 X1 22.5 mm 27.5 mm CAPACITANCE (numerically)
MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
Example: 104 = 10 x 10 = 100 nF
BFC2 2222(*)
(*) Old ordering code
336 1X XX X 336 1X XX X
TYPE 336 1
PACKAGING loose in box
LEAD CONFIGURATION lead length 3.5 0.3 mm lead length 25.0 2.0 mm
C-TOL
PREFERRED TYPES BFC2 336 10...
X1
20 %
BFC2 336 16... ON REQUEST
336 1 X1
loose in box taped on reel
lead length 3.5 0.3 mm lead length 25.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm; reel diameter 500 mm
10 % 20 % 10 %
BFC2 336 11... BFC2 336 17... BFC2 336 13... BFC2 336 14...
Note (1) For detailed tape specifications refer to Packaging information www.vishay.com/docs/28139/packinfo.pdf
SPECIFIC REFERENCE DATA MKP 336 1 275 VAC
DESCRIPTION Tangent of loss angle: C 100 nF 100 nF < C 470 nF C > 470 nF Rated voltage pulse slope (dU/dt)R at 385 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 min RC between leads, for C > 0.33 F at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case 250 V/s 150 V/s 100 V/s > 15 000 M > 5000 s > 30 000 M 3400 V; 1 min 2050 V; 1 min VALUE at 10 kHz 10 x 10-4 20 x 10-4 70 x 10-4
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 171
MKP 336 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
MKP 336 1 GENERAL DATA
URac = 275 V; C-tol = 20 %
CATALOG NUMBER BFC2 336 1 ..... AND PACKAGING C (F) DIMENSIONS Wx HxL (mm) LOOSE IN BOX MASS (g(1) lt = 3.5 0.3 Last 5 digits of catalog number Pitch = 15.0 0.4 mm; dt = 0.6 0.06 mm 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.1 0.15 0.22 0.22 0.33 0.47 0.68 1 Notes 1. Weight for short lead product only 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 11.0 x 21.0 x31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 1.4 1.8 2.4 3 2.9 3.8 6.8 7.4 9.2 12.3 16.1 20.3 Pitch = 15.0 0.4 mm; dt = 0.8 0.08 mm 10473 10683 10104 19003 10154 10224 19005 10334 10474 10684 10105 50 100 200 1000 500 16473 16683 16104 19008 16154 16224 19009 16334 16474 16684 16105 75 125 500 500 13473 13683 13104 19004 13154 13224 800 650 600 550 450 400 5.0 x 11.0 x 17.5 1 19001 10153 10223 10333 1000 19007 16153 16223 16333 1000 19002 13153 13223 13333 900 1100 SPQ lt = 25.0 2.0 mm Last 5 digits of catalog number SPQ REEL H = 18.5 mm; P0 = 12.7 mm Last 5 digits of catalog number SPQ
Pitch = 22.5 0.4 mm; dt = 0.8 0.08 mm
Pitch = 27.5 0.4 mm; dt = 0.8 0.08 mm
www.vishay.com 172
For technical questions contact: rfi@vishay.com
Document Number: 28117 Revision: 15-Feb-08
MKP 336 1 X1
Interference Suppression Film Capacitors
URAC = 275 V; C-TOL = 10 %
CATALOG NUMBER BFC2 336 1..... AND PACKAGING C (F) DIMENSIONS Wx HxL (mm) MASS (g)(1) LOOSE IN BOX lt = 3.5 0.3 m last 5 digits Pitch = 15.0 0.4 mm; dt = 0.6 0.06 mm 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 Note 1. Weight for short lead product only 6.0 x 12.0 x 17.5 1.4 5.0 x 11.0 x 17.5 1 11103 11123 11153 11183 11223 11273 11333 11393 11473 11563 11683 11823 11104 11124 11154 11184 11224 11274 11334 11394 11474 11564 11684 11824 50 100 200 500 1000 1000 17103 17123 17153 17183 17223 17273 17333 17393 17473 17563 17683 17823 17104 17124 17154 17184 17224 17274 17334 17394 17474 17564 17684 17824 75 125 500 250 500 500 1000 14103 14123 14153 14183 14223 14273 14333 14393 14473 14563 14683 14823 14104 14124 14154 14184 900 1100 SPQ lt = 25.0 2.0 mm last 5 digits SPQ REEL H = 18.5 mm; P0 = 12.7 mm last 5 digits SPQ
Vishay BCcomponents
Pitch = 15.0 0.4 mm; dt = 0.8 0.08 mm 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 1.8 2.4 3 800 650 600
Pitch = 22.5 0.4 mm; dt = 0.8 0.08 mm 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 2.9 3.8 6.8 550 450 400
Pitch = 27.5 0.4 mm; dt = 0.8 0.08 m 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 7.4 9.2 12.3 16.1 20.3
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 173
MKP 336 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
SAFETY APPROVALS X1 VOLTAGE VALUE FILE NUMBERS EN132400 275 V (AC) 10 nF to 1 F FI 2006020 UL1414 250 V (AC) 10 nF to 1 F E112471 UL1283 275V (AC) 10 nF to 1 F E109565 CSA-C22.2 No.1 250 V (AC) 10 nF to 1 F 1104860 The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
16
MOUNTING
Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to "Packaging information". Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: * For pitches 15 mm capacitors shall be mechanicelly fixed by the leads * For longer pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on printed Circuit Board The maximum length and width of film capacitors is shown in Figure: * Eccentricity as in figure. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned * Product height with seating plane as given by "IEC 60717" as reference: hmax h + 0.3 mm
(R)
bmax = b + 0.3 mm eccentricity
lmax = I + 0.3 mm
CBA116
Storage Temperature * Storage temperature: Tstg = 25 to + 40 C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2 %. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com 174
For technical questions contact: rfi@vishay.com
Document Number: 28117 Revision: 15-Feb-08
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
CHARACTERISTICS Capacitance
DC/C (%)
4 2
Vishay BCcomponents
Tangent of loss angle
Dissipation factor (x 10-4)
103
typical
0 max. -2
102
101
F F =1 C <1 C F F < 20 n 0n 2 22 < C F 47 n nF 47 F < C F n 10 n 10 C
-4 min. - 50 0 50 Tamb (C) 100
-6
100 101
102
103
104
f (Hz)
105
Impedance
10
3
Resonant frequency
1n nF
102
Impedance ()
10
10
1
10
0
47 nF 10 0n F 47 0n F 10 00 nF
nF
f (MHz)
101 100
4.7
F
X1
10
-1
10
-2
10-1
10
4
10
5
10
6
10
7
f (Hz)
10
1
10
100
1000
C (nF)
10 000
Max RMS voltage and AC current (sinewave)
10
3
10
4
AC voltage (V)
AC current (mA)
1000 nF 470 nF 100 nF 47 nF
10 10
2
2
10
1
10 nF 4.7 nF
0
10
Tamb 105 C
1 nF Tamb 100 C 10
1
10
1
10
-1
10
1
10
2
10
3
10
4
f (Hz)
10
5
10
2
10
3
10
4
f (Hz)
10
5
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 175
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
CHARACTERISTICS
Capacitance
106
Vishay BCcomponents
105
104 0 20 40 60 100 80 Tamb (C)
APPLICATION NOTES
* For X1 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). * These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. * These capacitors are not intended for series impedance application. For these situations in case safety approvals are requested, please refer to our special capacitors of 1772 series with internal series connection. * The maximum ambient temperature must not exceed 105 C. * Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage.
RC (s)
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 176
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
Vishay BCcomponents
INSPECTION REQUIREMENTS General Notes: 1. Sub-clause numbers of tests and performance requirements refer to the " Sectional Specification, IEC-puplication EN 132400 (IEC 60384-14) and section One of this specification". 2. In this table: D = destructive ND = non destructive
Group C inspection requirements
SUB - CLAUSE NUMBER AND TEST SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) D OR ND D As specified in Chapters "General data" of this specification
CONDITIONS
PERFORMANCE REQUIREMENTS
Initial measurements
Capacitance Tangent of loss angle: For C 470 nF at 100 kHz For C > 470 nF at 10 kHz Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90 No pre-drying Method: 1A Solder bath: 260 C Duration: 10 s Isopropylalcohol at room temperature Method: 2 Immersion time: 5 0.5 min Recovery time: Min. 1 hour, max. 2 hours Visual examination No visible damage Legible marking |C/C| 5 % of the value measured initially Increase of tan : 0.0100 for: C 100 nF or 0.0200 for: 100 nF < C 470 nF or 0.0080 for: C > 470 nF Compared to values measured initially As specified in Section "Insulation Resistance" of this specification No visible damage
4.3 Robustness of terminations 4.4 Resistance to soldering heat
4.19 Component solvent resistance
4.4.2 Final measurements
Capacitance
Tangent of loss angle
Insulation resistance
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 177
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
SUB - CLAUSE NUMBER AND TEST SUB - GROUP C1B PART OF SAMPLE OF SUB - GROUP C1 Initial measurements D OR ND D Capacitance Tangent of loss angle: For C 470 nF at 100 kHz For C > 470 nF at 10 kHz Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 0.5 min A = - 55 C B = + 105 C 5 cycles Duration t = 30 min Visual examination Mounting: see Section "Mounting" of this specification Procedure B4: Frequency range: 10 to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 hours Visual examination Mounting: see Section "Mounting" for more information Pulse shape: half sine Acceleration: 490 m/s Duration of pulse: 11 ms No visible damage Legible marking
Vishay BCcomponents
CONDITIONS
PERFORMANCE REQUIREMENTS
4.20 Solvent resistance of the marking: see Section "General notes"; item 5
No visible damage
4.6 Rapid change of temperature
4.6.1 Inspection 4.7 Vibration (see note 3.1)
No visible damage
4.7.2 Final inspection 4.9 Shock (see note 3)
No visible damage
4.9.2 Final measurements
Visual examination Capacitance
No visible damage |C/C| 5 % of the value measured initially Increase of tan : 0.0100 for: C 100 nF or 0.0200 for: 100 nF < C 470 nF or 0.0080 for: C > 470 nF Compared to values measured initially
Tangent of loss angle
Insulation resistance
As specified in Section "Insulation Resistance" of this specification
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 178
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
SUB - CLAUSE NUMBER AND TEST SUB - GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B Temperature: 105 C Duration: 16 hours D OR ND
Vishay BCcomponents
CONDITIONS
PERFORMANCE REQUIREMENTS
D
4.11.2 Dry heat 4.11.3 Damp heat cyclic Test Db 4.11.4 Cold 4.11.5 Damp heat cyclic Test Db 4.11.6 Final measurements
Temperature: - 55 C Duration: 2 hours
Visual examination
No visible damage Legible marking |C/C| 5 % of the value measured in 4.11.1. Increase of tan : 0.0100 for: C 100 nF or 0.0200 for: 100 nF < C 470 nF or 0.0080 for: C > 470 nF Compared to values measured in 4.11.1 No permanent breakdown or flash-over 50 % of values specified in Section "Insulation resistance" of this specification
Capacitance
Tangent of loss angle
Voltage proof 1200 V (DC); 1 min between term. Insulation resistance
SUB - GROUP C2 4.12 Damp heat steady state
D 56 days, 40 C, 90 to 95 % RH, no load Capacitance Tangent of loss angle at 10 kHz
4.12.1 Initial measurements
4.12.3 Final measurements
Visual examination
No visible damage Legible marking |C/C| 5 % of the value measured in 4.12.1. Increase of tan : 0.0080 Compared to values measured in 4.12.1. No permanent breakdown or flash-over 50 % of values specified in Section "Insulation resistance" of this specification www.vishay.com 179
Capacitance
Tangent of loss angle
Voltage proof 1200 V (DC); 1 min between term. Insulation resistance
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
SUB - CLAUSE NUMBER AND TEST SUB GROUP C3 4.13.1 Initial measurements D OR ND D Capacitance Tangent of loss angle: For C 470 nF at 100 kHz For C > 470 nF at 10 kHz 3 successive impulses, full wave, peak voltage: X1: 4 kV Max. 24 pulses Duration: 1000 hours 1.25 URac at 105 C Once in every hour the voltage is increased to 1000 V (RMS) for 0.1 s via resistor of 47 5 % Visual examination Capacitance Tangent of loss angle
Vishay BCcomponents
CONDITIONS
PERFORMANCE REQUIREMENTS
4.13 Impulse voltage
No selfhealing breakdowns or flashover
4.14 Endurance
4.14.7 Final measurements
No visible damage Legible marking |C/C| 10 % compared to values measured in 4.13.1. Increase of tan : 0.0100 for: C 100 nF or 0.0200 for: 100 nF < C 470 nF or 0.0080 for: C > 470 nF Compared to values measured in 4.13.1. No permanent breakdown or flash-over
Voltage proof 1200 V (DC); 1 min between terminations. 2050 V (DC); 1 min between terminations and case. Insulation resistance
50 % of values specified in Section "Insulation resistance" of this specification
SUB - GROUP C 4 4.15 Charge and discharge
D 10 000 cycles (50 c/s) charge to UR half sinewave Duration: 5 ms Discharge resistance: 385 Vdc R = -------------------------------------------------1.5 x C ( ( dU ) ( dt ) ) Rmin = 2.2
4.15.1 Initial measurements
Capacitance Tangent of loss angle For C 470 nF at 100 kHz For C > 470 nF at 10 kHz Capacitance Tangent of loss angle |C/C| 10 % compared to values measured in 4.15.1. Increase of tan d: 0.0100 for: C 100 nF or 0.0200 for: 100 nF < C 470 nF or 0.0080 for: C > 470 nF Compared to values measured in 4.15.1 50 % of values specified in Section "Insulation resistance" of this specification
4.15.3 Final measurements
Insulation resistance
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 180
MKP 336 1 X1
Interference Suppression Film Capacitors MKP Radial Potted Type
SUB - CLAUSE NUMBER AND TEST SUB - GROUP C5 4.16 Radio frequency characteristic D OR ND D Resonance frequency As specified in Section "Resonant frequency" of this specification. 10 %
Vishay BCcomponents
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB - GROUP C6 4.17 Passive flammability Class B
D Bore of gas jet: O 0.5 mm Fuel: butane Test duration for actual volume V in mm: V 250: 10 s 250 < V 500: 20 s 500 < V 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample.
12 mm ~ 8 mm
45.0
SUB - GROUP C7 4.18 Active flammability
D 20 x 4 kV discharges on the test capacitor connected to UR The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required.
Document Number: 28117 Revision: 15-Feb-08
For technical questions contact: rfi@vishay.com
www.vishay.com 181
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of MKP3361X1

	To Download MKP3361X1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .